2SK — Single-stage Liquid Ring Vacuum Pump
Summarize
The channel between the two stages is composed of an intermediate disc and a connecting pipe, the rotating part is composed of a shaft and a two-stage impeller, and the fixed part is composed of an inlet and outlet pump cover, two pump bodies, an intake disc and a bearing bracket. The motor and pump parts of the drive are connected by a coupling, and the pump and motor are mounted on a common base. The pump has double stage action and high limit vacuum. Separate design, stable and reliable operation, mechanical seal, to ensure a clean working environment, low vibration, low noise, suitable for a wide range of industrial fields.
2SK Type Two-Stage liquid Ring Vacuum Pump
Summarize
The channel between the two stages is composed of an intermediate disc and a connecting pipe, the rotating part is composed of a shaft and a two-stage impeller, and the fixed part is composed of an inlet and outlet pump cover, two pump bodies, an intake disc and a bearing bracket. The motor and pump parts of the drive are connected by a coupling, and the pump and motor are mounted on a common base. The pump has double stage action and high limit vacuum. Separate design, stable and reliable operation, mechanical seal, to ensure a clean working environment, low vibration, low noise, suitable for a wide range of industrial fields.
Use
It is mainly used to remove air and other gases that are corrosive, insoluble in liquid, and allow to contain a small amount of solid particles. Widely used in food, textile, pharmaceutical, chemical and other industries vacuum evaporation, concentration, impregnation, drying and other industrial processes.
Type-Performance-parameter
Performance parameters | Pumping Speed (m3/min) | Pressure Limit (Pa) | Power of motor (KW) | Revolution (Rpm) | liquid-supply quantity (L/min) | Caliber of air inlet and outlet (mm) |
2SK-1.5A/B | 1.5 | 3300 | 4 | 1440 | 10-15 | ∅40 |
2SK-3A/B | 3 | 7.5 | 1440 | 15-20 | ∅40 | |
2SK-6A/B | 6 | 15 | 1440 | 25-30 | ∅80 | |
2SK-12A/B | 12 | 22 | 970 | 40-50 | ∅100 | |
2SK-20A/B | 20 | 37 | 740 | 60-80 | ∅125 | |
2SK-30A/B | 30 | 55 | 740 | 70-90 | ∅125 |
Note:
1. The performance indicators listed in the table are obtained under the following conditions: ① Atmospheric pressure 760mmHg; ② liquid temperature 15℃; ③ Air temperature 20℃; ④ Relative humidity of gas 70%
2, the liquid supply is the value of suction vacuum -400mmHg, the limit vacuum can be greater than this value.
3. The deviation of pumping volume does not exceed ±3%
4, the above model vacuum pump can provide all stainless steel.
5, "B "indicates that the bearing thickness is increased, which can extend the service life.
